How Brake Pads are Made

katma 3 Tem 2019
görünümler 2 470 658
386

Brake pad replacement? Ever wonder how to make brake pads? Usually I show you a DIY like how to replace brake pads, but in this video I show you how brake pads are made!
Brake pads from this factory: www.NRSbrakes.com/nrs-chrisfix/
To make brake pads, we start out with raw pickled and oiled steel. The steel gets stamped into a brake pad backing plate which gets analyzed to make sure it meets OEM specifications. Next the brake pad backing plate goes to the NRS press to get a mechanical attachment. Then the backing plates get galvanized and finally brake pad friction material is added. The manufacturer can add and friction material they want such as semi-metallic, organic, or ceramic friction material. Lastly the shim is made and installed on the brake pad and they can be sent to testing! When it is all said and done, I took the brake pads we made and installed them on my truck with new brake rotors!
The company that let me film in their factory is giving all of my fans 20% off their brakes using the code "20off" at checkout. I do not make any money from this! They are doing this to get you guys to try out their new technology brake pads and I will always share a discount to help my subscribers. Here is the link: www.NRSbrakes.com/nrs-chrisfix/
How to replace your own brake pads and rotors: trdown.info/cycle/bIuGnoyVyLF6gsk/video
How to Replace Drum Brakes: trdown.info/cycle/h26fmKp_zbCgd9U/video
Drum to Disc Conversion: Still working on this video
→ Become a ChrisFix Subscriber: trdown.info
→ Instagram: chrisfixit
→ Facebook: chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: trdown.info
**If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

ChrisFix
YORUMLAR  
  • ChrisFix

    ChrisFix

    Yıl önce

    The company that let me film in their factory is giving all of my fans 20% off their brakes using the code "20off" at checkout. I do not make any money from this! They are doing this to get you guys to try out their new technology brake pads and I will always share a discount to help my subscribers. Here is the link: https://www.carid.com/nrs-brakes/

    This video was one of my most favorite that I have ever made! It took about a months worth of work and I hope you enjoy! It took a lot of time and work to make and NRS brakes literally closed down part of their manufacturing line so I could film this. It’s absolutely incredible how much help they were! I hope you guys like it and I hope other brands reach out so we can do more of these how-it’s-made episodes!
    Also I will be in Ireland for a meet-up on Saturday July 13 so check out my Instagram or YouTube stories for more info if you are from Ireland!

    • Lua Vailoaloa

      Lua Vailoaloa

      23 gün önce

      hi chris, i have a 2013 harley 883, im trying to put back my front caliper brakes on but the pads are stuck together which wont let me attach th calipers back on? any idea how to release the pads

    • DoTheEvolution78

      DoTheEvolution78

      2 aylar önce

      Excellent video on How Brake Pads Are Made. I would like to see future videos with other sponsors with factory tours... Happy New Years!

    • Cyclone Cyd

      Cyclone Cyd

      3 aylar önce

      For shame - they don't make pads for my Saab with 314 brakes 🙄 would have loved to give them a try

    • Marty Curren

      Marty Curren

      3 aylar önce

      Take a breath and stop shouting FFS

    • tiago 999

      tiago 999

      5 aylar önce

      METE AS LEGENDAS NU CU

  • StingJay

    StingJay

    15 saatler önce

    Amazing video. You are the best youtuber i've ever seen.

  • indnajns

    indnajns

    2 gün önce

    Extremely well done. Both you and the factory should be proud. Very informative and it's useful to know the "why" behind things so you can make better decisions when buying and when fixing.

  • Oli The Optimist

    Oli The Optimist

    6 gün önce

    If the breaks do not break then you are gonna break your life’s break!

  • iMythixz

    iMythixz

    7 gün önce

    Can you try to do how engines are made?

  • Corey Dorsey

    Corey Dorsey

    7 gün önce

    What's the brand of those crappy rusted pads?

  • SeagreenSpiral

    SeagreenSpiral

    8 gün önce

    Video starts at 3:00 because he never shuts up

  • Mavrick Larkin

    Mavrick Larkin

    10 gün önce

    I love your videos

  • Alex Rivera

    Alex Rivera

    11 gün önce

    Awesome.... Please continúe with videos " how are Made".... Greetings from El Salvador

  • O Bazaar

    O Bazaar

    13 gün önce

    I still aint buying no NRS brakes, but thanks for sharing how pads are made.

  • Manuel Medina

    Manuel Medina

    13 gün önce

    cool

  • Diego Alfredo Puma Jaramillo

    Diego Alfredo Puma Jaramillo

    14 gün önce

    Why are there many dislikes?

    • ChrisFix

      ChrisFix

      13 gün önce

      Haters gonna hate!

  • Jim M

    Jim M

    16 gün önce

    Great video Chris. Thanks to you I have bought my first pair of NRS brake pads for my Honda Ridgeline. They're being shipped from Toronto I can't wait to get them on my truck.

  • Dick The Dorkwing

    Dick The Dorkwing

    17 gün önce

    Circa Chris Farley: "you can stick your head up a bulls ass to see how a steak is made, but wouldn't you rather take the butcher's word for it".
    I'll take my comment with a side of beef and a hefty charge of ridicule.

  • Enter Name

    Enter Name

    18 gün önce

    Hey guys Chris fix here, today we are going to swap this in-line 4 for a thermonuclear reactor!

    • Enter Name

      Enter Name

      17 gün önce

      @ChrisFix thermonuclear power is where it’s at

    • ChrisFix

      ChrisFix

      17 gün önce

      I think an LS or something would be good enough lol

  • Arthur Garcia

    Arthur Garcia

    19 gün önce

    "SHEEN"?
    Is that how you pronounce Shine?
    Never herd it that way crazy.
    Awesome video though!

  • imjustinjong友然

    imjustinjong友然

    20 gün önce

    very cool

  • Sushanto Gupta

    Sushanto Gupta

    20 gün önce

    Wow !! Very interesting 😃

    • ChrisFix

      ChrisFix

      20 gün önce

      I'm glad you found the video interesting!

  • eric dejong

    eric dejong

    21 gün önce

    Wudder!!!, lmao

    • ChrisFix

      ChrisFix

      20 gün önce

      *Wooder :p

  • CPX

    CPX

    21 gün önce

    one more thing.. it's time to keep the new brakes and change the car..LOL

  • Mohd Ahmed

    Mohd Ahmed

    22 gün önce

    Very nice presentation 👍

  • TDF Public

    TDF Public

    22 gün önce

    This was a great video that surpassed the "How It's Made" show in many respects. I would love to see more videos like this. One improvement you can and should make, is provide better video coverage of the individual steps. (Instead of just showing a component going into a chamber, show what's happening in the chamber.) This is where How It's Made has you beat. They were pretty consistent in getting the viewer a close up view of all the steps. But that's the only area they have you beat. My biggest complaint with the TV show was that all to often, they left me with more questions than answers. This is where your vid really shines. You not only answered every question I would have thought to ask, you showed things I would not have considered. Like brake rotors glowing pink in a torture test!!! That shot was worthy of Mythbusters.

  • Zerbin Auto

    Zerbin Auto

    23 gün önce

    Wait wait wait. The GOOD brake pads light on fire after braking 15 times? That doesn't sound right. But who brakes 15 hard stops in a row? Teenagers.......Or anyone driving a rental 😂

  • Ian Kim

    Ian Kim

    23 gün önce

    I think there’s 1000000000000 brake pads

  • RAM6165

    RAM6165

    23 gün önce

    Loved the video! Please do more.

  • Hydro

    Hydro

    24 gün önce

    Hey Chris, whats a good brake rotor brand?

  • Alan Grant

    Alan Grant

    24 gün önce

    Love your work this one is especially cool

    • ChrisFix

      ChrisFix

      24 gün önce

      Thanks a lot!

  • Wendy Yallop

    Wendy Yallop

    25 gün önce

    The offbeat drum certainly surprise because bangladesh geographically deceive down a jealous kite. decisive, painstaking shampoo

  • E Anderson

    E Anderson

    26 gün önce

    It would be interesting to see how the friction material is made as well.

  • MrPiratjen

    MrPiratjen

    26 gün önce

    Hey ChrisFix!
    It is a really professional and fantastic video. You beat other how it's made videos by far!
    Really appreciate your videos!

  • Prithun mech

    Prithun mech

    28 gün önce

    "How brake pad friction materials are manufactured" this topic is not covered.

  • millionair person

    millionair person

    28 gün önce

    Gôod job nice education

  • I'm a racist

    I'm a racist

    28 gün önce

    chris gon be the smartereveryday but for cars

  • Tom von Wicht

    Tom von Wicht

    Aylar önce

    cool idea

  • Robert Tomasino

    Robert Tomasino

    Aylar önce

    To Chris fix, I am fairly new to your site.I already learned a lot from your videos. Showing how brakes are made was super interesting and informative. I would love to see more. Thank you

  • Brand Uncensored

    Brand Uncensored

    Aylar önce

    Can you do series on manufacturing process of muffler bearings?

  • Aaron Balchand

    Aaron Balchand

    Aylar önce

    Ayyyyyy! As a canadian i hope you had a good time here!

  • LOLSflint

    LOLSflint

    Aylar önce

    AAAAA I LIVE IN TORONTO

  • Brent Lackey

    Brent Lackey

    Aylar önce

    Where are your jack stands?

    • ChrisFix

      ChrisFix

      Aylar önce

      0:00

  • Noorazman Jumaat

    Noorazman Jumaat

    Aylar önce

    Hi.. What your opinion about remake brake. (used brake pad send back for engineering shop for shoe/pad replacement. Normally they used special glue. Tq

  • Piotr R

    Piotr R

    Aylar önce

    Clean up the rust, paint, fck 1/2 life of car parts. Oh no, it would cost and they wouldn't pay :)

    • ChrisFix

      ChrisFix

      Aylar önce

      huh?

  • Hemi HP

    Hemi HP

    Aylar önce

    ChrisFix in a vehicle factory: *hold my tools*

  • alok singh

    alok singh

    Aylar önce

    🇮🇳 india 👍🏻

    • alok singh

      alok singh

      Aylar önce

      Thanks for heart👍🏻 love all ur video

  • amittyagiat80

    amittyagiat80

    Aylar önce

    Excellent information.

    • amittyagiat80

      amittyagiat80

      Aylar önce

      @ChrisFix yup. I recently got my brake pads changed. But after watching this video I found nucap is far way superior making drive more safe.

    • ChrisFix

      ChrisFix

      Aylar önce

      Glad you think so!

  • Not_Real

    Not_Real

    Aylar önce

    can Chris rig?

  • ishimwe soni

    ishimwe soni

    Aylar önce

    I really enjoyed watching this video thank you so much ChrisFix

  • Wiktor Gliniecki

    Wiktor Gliniecki

    Aylar önce

    Thank you! This video is very informative and im sure to buy these brake pads from now on!

    • Wiktor Gliniecki

      Wiktor Gliniecki

      Aylar önce

      @ChrisFix thank you for taking the time to reply and read comments unlike most other youtubers😀

    • ChrisFix

      ChrisFix

      Aylar önce

      I'm glad you found the video informative!

  • Vinícius Nery

    Vinícius Nery

    Aylar önce

    Well, either no more companies reached or the response wasn't that goo, since it's been almost 2 years and this is the only "How it's made" video. So sad.

  • Mike Nate

    Mike Nate

    Aylar önce

    i like the video but your voice is so annoying that i just stop watching it... stop exaggerating your voice tone...

  • Venkat Babu

    Venkat Babu

    Aylar önce

    Most erotion is brake and clutch. They control motion. You don't have both you way out.

  • Bob Smith

    Bob Smith

    Aylar önce

    I am surprised that there is still any products made here in Canada.

  • Irfan Irshad

    Irfan Irshad

    Aylar önce

    HI CHRIS..... great video.... dear i have a suzuki gypsy suv... how can i get my regular tyres 6 to 9 inches out from the original position. so it look broad. I am from Vehari, Pakistan. plz guide me properly. I have not yet subscribed you, sorry for that.

    • Irfan Irshad

      Irfan Irshad

      Aylar önce

      thanks Chris...

    • ChrisFix

      ChrisFix

      Aylar önce

      Thanks a lot! I’ll be making a video on wheel spacers soon, stay tuned!

  • SARL BRACO

    SARL BRACO

    Aylar önce

    Well you skipped few steps in the production process such as grinding but good and informative video for the general public overall 👍

    • ChrisFix

      ChrisFix

      Aylar önce

      Thanks for sharing!

  • Dean Henthorn

    Dean Henthorn

    Aylar önce

    Simply clean off the rust, put those back on.

  • Steve Holt

    Steve Holt

    Aylar önce

    NRS Brakes?

  • Paladin Donnie

    Paladin Donnie

    Aylar önce

    Yeah... most of nucap brake pads are made in china... ordered mine from autozone and it was made in china xD

  • Cooper Richards

    Cooper Richards

    Aylar önce

    You should go to a car factory and see how your favorite brand of car is made.

  • xot80

    xot80

    Aylar önce

    WTF this Chevy Tahoe have smaller brake disc than my old BMW 5 Touring. USA is 25 years behind Europe... Henry Ford himself showed how to worsen the quality of cars and you can see you have 100 years of experience in building counterfeit cars.

  • Isaac Carlson

    Isaac Carlson

    Aylar önce

    I have yet to find a set of pads that actually fits right. Most need to be filed to slide properly, some are loosy goosy.

  • FM

    FM

    Aylar önce

    I’m glad I found this. I learned something today.

  • Sil Bombardi

    Sil Bombardi

    Aylar önce

    Too much bla bla. Anyway, thanks!

  • Cap Jambo

    Cap Jambo

    Aylar önce

    Thanks to NRSBrakes for making this video possible.

    • Cap Jambo

      Cap Jambo

      Aylar önce

      @ChrisFix hey Chris I wouldn't be surprise more manufacturers do the same. Then again, you were in Canada, we all know Canadians are nice people. Awesome videos dude, I hope it has payed off all the efforts at all levels. Cheers from Portugal.

    • ChrisFix

      ChrisFix

      Aylar önce

      I'm happy they let me film everything needed to show you guys what goes into making brake pads! Pretty cool stuff!

  • Mohammad Reyaz

    Mohammad Reyaz

    Aylar önce

    Osmmm....👍

  • Brian Vogt

    Brian Vogt

    Aylar önce

    It's amazing that the factory gave you so much access with cameras. They really trusted you, and you've been faithful to it.
    You've conveyed the information in a way that everybody can understand.
    It's a win/win/win for you, the company & us.

  • Joel Escobedo

    Joel Escobedo

    Aylar önce

    Exelent!!

  • Recon

    Recon

    Aylar önce

    14:23
    The likelihood is you'll never see this on the road.
    "Me dropping a fat skid on the brakes"

  • Recon

    Recon

    Aylar önce

    Say Pickled and Oiled Steel 3 times in a mirror and ChrisFix appears behind you to help with your projects.

  • harrison corey

    harrison corey

    Aylar önce

    Hearing americans pronounce ToronTo is so funny

  • AFAYIN CHANNEL

    AFAYIN CHANNEL

    Aylar önce

    that is very cool..!! Your video is very inspiring, really your video is very useful $

    • ChrisFix

      ChrisFix

      Aylar önce

      Thanks a lot!

  • Aerie Qush

    Aerie Qush

    Aylar önce

    idk if chris would actually noticed this but
    to be honest your video just helped me to complete my whole assignment . thanks !

  • Laur's Channel

    Laur's Channel

    Aylar önce

    Hello there, Chris Fix! I spend a lot of time on a '93 ARO 244, it's got drum brakes all-around, brake pump is fine, it brakes but loses line pressure and needs pumping by foot, last time when I installed a front drum I saw one of the cylinders bubbling around its gasket, should I consider replacing it? I got some spare gaskets!

  • sundanske

    sundanske

    Aylar önce

    Thank you for this great jop youve done to explain how its made .....

  • Post Modern

    Post Modern

    Aylar önce

    How is the pad material made?

    • ChrisFix

      ChrisFix

      Aylar önce

      For another video!

  • Vikas Malineni

    Vikas Malineni

    Aylar önce

    Please make video on various suspension's , if possible their manufacturing process

  • Tyler Johnson

    Tyler Johnson

    Aylar önce

    Challenge: Take a shot every time Chris says "Backing Plate"
    ...
    Congrats, you now have alcohol poisoning!

  • Josh Ehleiter

    Josh Ehleiter

    Aylar önce

    You should have gone to Callahan autoparts from Tommy boy😂

  • Wijaya Bandara

    Wijaya Bandara

    Aylar önce

    NICE WORK BRO

  • djcrazy

    djcrazy

    Aylar önce

    that looks so easy to install!!

  • Brandon Lindsay

    Brandon Lindsay

    Aylar önce

    You are my role model and I want to be just like you repairing cars and trucks in my drive with common hand tools

  • mr grumpy

    mr grumpy

    Aylar önce

    very interesting .. thank you

  • Diego Damo

    Diego Damo

    Aylar önce

    What a wonderful world if YT would contain only educational videos like this...

  • Arketor

    Arketor

    Aylar önce

    Hey guys😂 nice to hear evrytime

    • ChrisFix

      ChrisFix

      Aylar önce

      ChrisFix here! :p

  • Ritesh Mahajan

    Ritesh Mahajan

    Aylar önce

    REALLY ENJOYED EVERY BIT OF IT ... THANKS MAN..!

    • ChrisFix

      ChrisFix

      Aylar önce

      I'm glad you enjoyed the video! Thanks a lot!

  • Reymark Abansado

    Reymark Abansado

    Aylar önce

    Continue doing this Video maybe next one show us how engine made

    • ChrisFix

      ChrisFix

      Aylar önce

      Thanks for the video idea!

  • Badminton London

    Badminton London

    Aylar önce

    How did the galvanized pad with the spikes get the holes filled with material? By Magic?

  • Francis Ndung'u

    Francis Ndung'u

    Aylar önce

    Your test car caught fire, what happened next?

  • David Lefort

    David Lefort

    Aylar önce

    how the friction pads are made that what i wanted to see

  • Danny Draper

    Danny Draper

    2 aylar önce

    Fantastic video mate, well done

    • stewmoo free speech T-shirt

      stewmoo free speech T-shirt

      2 aylar önce

      This company also cares about poor and desperate labor from poor countries by hiring them which will make Canadians wages go sky high. "But it don't make no sense!" Pa cried. "Not till you see the fella that put out this here bill. You'll see him, or somebody that's workin' for him. You'll be a-campin' by a ditch, you an' fifty other famblies. An' he'll look in your tent an' see if you got anything lef' to eat. An' if you got nothin', he says, 'Wanna job?' An' you'll say, 'I sure do, mister. I'll sure thank you for a chance to do some work.' An' he'll say, 'I can use you.' An' you'll say, 'When do I start?' An' he'll tell you where to go, an' what time, an' then he'll go on. Maybe he needs two hunderd men, so he talks to five hunderd, an' they tell other folks, an' when you get to the place, they's a thousan' men. This here fella says, 'I'm payin' twenty cents an hour.' An' maybe half a the men walk off. But they's still five hunderd that's so goddamn hungry they'll work for nothin' but biscuits. Well, this here fella's got a contract to pick them peaches or-chop that cotton. You see now? The more fellas he can get, an' the hungrier, less he's gonna pay. An' he'll get a fella with kids if he can, 'cause-hell, I says I wasn't gonna fret ya." The circle of faces looked coldly at him. The eyes tested his words. The ragged man grew self-conscious. "I says I wasn't gonna fret ya, an' here I'm a-doin' it. You gonna go on. You ain't goin' back."

  • Kervon Taylor

    Kervon Taylor

    2 aylar önce

    Hey Chris man you are truely are an insperation mon keep doing what you do. Blessings

  • Alex Lammers Gómez

    Alex Lammers Gómez

    2 aylar önce

    I love your videos I want to be a mechanic I love cars sice I was little

  • Derek Young

    Derek Young

    2 aylar önce

    Take a drink every time you hear the words "backing plate".

  • Neil Clark

    Neil Clark

    2 aylar önce

    think they are making backing plates...

  • erwin benally

    erwin benally

    2 aylar önce

    Yes please continue making these type videos

  • George Andrews

    George Andrews

    2 aylar önce

    You are talking about brakes. I know you're American but please stop trying to sound like a rock star it so tiresome. Thanks.
    Ps . what do you sound like when you're getting layed haha

    • stewmoo free speech T-shirt

      stewmoo free speech T-shirt

      2 aylar önce

      So glad that Chris did not censor your comment. We already have enough corporate fascism in the United States. "But it don't make no sense!" Pa cried. "Not till you see the fella that put out this here bill. You'll see him, or somebody that's workin' for him. You'll be a-campin' by a ditch, you an' fifty other famblies. An' he'll look in your tent an' see if you got anything lef' to eat. An' if you got nothin', he says, 'Wanna job?' An' you'll say, 'I sure do, mister. I'll sure thank you for a chance to do some work.' An' he'll say, 'I can use you.' An' you'll say, 'When do I start?' An' he'll tell you where to go, an' what time, an' then he'll go on. Maybe he needs two hunderd men, so he talks to five hunderd, an' they tell other folks, an' when you get to the place, they's a thousan' men. This here fella says, 'I'm payin' twenty cents an hour.' An' maybe half a the men walk off. But they's still five hunderd that's so goddamn hungry they'll work for nothin' but biscuits. Well, this here fella's got a contract to pick them peaches or-chop that cotton. You see now? The more fellas he can get, an' the hungrier, less he's gonna pay. An' he'll get a fella with kids if he can, 'cause-hell, I says I wasn't gonna fret ya." The circle of faces looked coldly at him. The eyes tested his words. The ragged man grew self-conscious. "I says I wasn't gonna fret ya, an' here I'm a-doin' it. You gonna go on. You ain't goin' back."

  • DORKUCHO TANIHU

    DORKUCHO TANIHU

    2 aylar önce

    I thank you for the step by step information about how the cars WE THE brake pads are made. THANKS

  • Tudy S

    Tudy S

    2 aylar önce

    Hey ChrisFix!🥂

  • Jamie Palafox

    Jamie Palafox

    2 aylar önce

    Did u guy Figuer it out the brake are gonna be locked and how to never buy brake pads I think they were on the how bearings never were out hahaha but who u think know and build all your cars too hahah

    • Jamie Palafox

      Jamie Palafox

      2 aylar önce

      Please hurry or get some one that can do your fucken job the right way to move forward with plan yes a car can be made to never go out or brake down God

  • Rokas Siniauskas

    Rokas Siniauskas

    2 aylar önce

    For me, it's missing the most important part. How friction material is made, and what materials and process is used in the making.

  • Jay Strock

    Jay Strock

    2 aylar önce

    I worked at a company that assembled brakes. I was a temporary employee. It is all about cheap labor. The assembly line is very sophisticated. Most employees are not well trained. The assembly lines are constantly shutting down because of mechanical issues. The assemblies work, and are quality. Half of the employees really do not know what they are doing because they have risen to a job beyond their ability and poor training. Cheap labor! It must work because this factory has been making brakes for years, but is going to move to Mexico from USA in the next few years.

    • stewmoo free speech T-shirt

      stewmoo free speech T-shirt

      2 aylar önce

      They are in Canada, and yes, corporate fascism is alive and well in the United States. Wages intersect with supply and demand for mass immigration from poor countries to keep American workers wages low. "But it don't make no sense!" Pa cried. "Not till you see the fella that put out this here bill. You'll see him, or somebody that's workin' for him. You'll be a-campin' by a ditch, you an' fifty other famblies. An' he'll look in your tent an' see if you got anything lef' to eat. An' if you got nothin', he says, 'Wanna job?' An' you'll say, 'I sure do, mister. I'll sure thank you for a chance to do some work.' An' he'll say, 'I can use you.' An' you'll say, 'When do I start?' An' he'll tell you where to go, an' what time, an' then he'll go on. Maybe he needs two hunderd men, so he talks to five hunderd, an' they tell other folks, an' when you get to the place, they's a thousan' men. This here fella says, 'I'm payin' twenty cents an hour.' An' maybe half a the men walk off. But they's still five hunderd that's so goddamn hungry they'll work for nothin' but biscuits. Well, this here fella's got a contract to pick them peaches or-chop that cotton. You see now? The more fellas he can get, an' the hungrier, less he's gonna pay. An' he'll get a fella with kids if he can, 'cause-hell, I says I wasn't gonna fret ya." The circle of faces looked coldly at him. The eyes tested his words. The ragged man grew self-conscious. "I says I wasn't gonna fret ya, an' here I'm a-doin' it. You gonna go on. You ain't goin' back."

  • ceeb2 thoj

    ceeb2 thoj

    2 aylar önce

    1:26 Near the Great Lakes